Click here for KMH-MPH Converters, Fog Light Controls and much more for the JDM Imports market
Click here to go to the Cartek Online Shop
CARTEKCOOLANT LEVEL SENSORS
Prevent engine damage before its too late
CARTEK can now offer drivers an early warning system should their engine cooling system develop a leak, whether it be from a punctured radiator, loose hose or gasket failure before overheating and engine damage occurs.
The Coolant Level Sensor from CARTEK consists of an aluminium sensor tube which is simply fitted in-line with the engine’s radiator hose. An Alarm signal will output from the Sensors 3 pin plug when the Coolant Level starts to drop.
There is also an LED warning status on the sensor itself to alert Pit crew when they are working inside the engine bay.
HOW IT WORKS
The Coolant Level Alarm from CARTEK consists of an aluminium sensor tube which is simply fitted in-line with the engine’s radiator hose. The coolant detection electronics are built into this sensor with a 3-pin plug for power input and an alarm signal output.
This alarm output can be used to alert the driver in a variety of ways including activating a dashboard LED indicator, audible buzzer or it can be used to provide the car’s ECU or driver display with a fault detection input signal.
The sensor also incorporates Red and Green LEDs which offers mechanics a continuous indication of the coolant status. This is especially useful if an engine is overheating without good reason or if an engine change has just occurred then this will show if the coolant has been filled correctly.
Engine damaged by coolant leak
Cartek produce 3 different sizes of the Coolant Level Sensor:
26mm, 32mm, 38mm
They all have an overall length of 70mm and are priced exactly the same.
SIZES: 26mm, 32mm OR 38mm.
OVERALL LENGTH: 70mm
VOLTAGE: 8V TO 27V
ALARM SIGNAL OUTPUT: OPEN COLLECTOR,SWITCHED TO 'EARTH' WHEN COOLANT IS LOW