FOLLOW US

NEWS

PRODUCTS

DEALERS

BUY NOW

CONTACT

DOWNLOADS

Home

FiA Rain Lights

Wireless Steering Wheel Controls

Coolant Level Sensors

Shift Lights

Digital Gear Indicators

Liteblox Batteries

Battery Isolators

Power Distribution Modules

Power Control Panels

PRODUCTS

 © 2017 Cartek Automotive Electronics Limited. All Rights Reserved.






CARTEK NEWSLETTER

Subscribe and get our latest news, product releases and latest guides.



CONTACT

CARTEK AUTOMOTIVE ELECTRONICS LTD


Unit 25, Mitchell Point

Ensign Way, Hamble

Southampton, SO31 4RF

United Kingdom


Tel: +44(0)2380 457747

Email: info@cartekmotorsport.com

CARTEK LINKS

Click here for KMH-MPH Converters, Fog Light Controls and much more for the JDM Imports market



Click here to go to the Cartek Online Shop


CARTEK POWER DISTRIBUTION PANEL

The next generation of Power Distribution

INTRODUCTION

Cartek Motorsport Electronics are pleased to announce the new Power Distribution Panel. This product is a full redesign of their successful but bespoke, Power Control Panels, with the main aim of allowing the user to customise and configure it themselves.


The CARTEK Power Distribution Panel is an all-in-one solid state solution to power distribution in your race car. Designed to replace all the Fuses, Relays and Switches - this unit greatly simplifies the wiring, saving weight and maximising reliability.






DIRECT REPLACEMENT

The CARTEK Power Distribution Panel is a 16 Channel PDM and Switch panel in one, The main advantage of using a Power Distribution Panel is that it directly replaces 16 Fuses, Relays, Switches and all the wiring in between.


FEATURES

16 RELAYS

16 SWITCHES

16 FUSES

FEATURES

HOW IT WORKS

ILLUMINATION

SPECIFICATION

POWER DISTRIBUTION PANEL

● 16 User Configurable Channels (no Laptop required)

● Selectable current settings of 5, 10 or 15 Amps. Combine two channels together for 20, 25 or 30 Amps

● Selectable Functions such as

-Momentary action (Starter Motor, Washer Pump etc)

-Latching (with memory)

-Latching (without memory)

-Latching with Time Delay (Heated Screen)

-Flashing (Indicators etc)

-Toggling (Headlights High Beam/Low Beam)

-0v Momentary action (use as ordinary switch for ECU Map etc)

● Over Current and Short Circuit Protection - no Fuses or Relays needed.

● Multi coloured Label Sheet included for full customisation.

● 2 Back light settings as standard.

● 16 Momentary Switch Inputs - allowing any channel to be operated by an additional switch or the CARTEK Wireless Control System.

● 16 ECU Inputs - allows the ECU to turn on channels such as Fuel Pumps.

● 4 Dedicated function inputs - Flash Input for Lights, Wash Input for Wipers, Wiper Park position etc.

HOW IT WORKS

BACK LIGHT ILLUMINATION

The CARTEK Power Distribution Panel comes with 2 Backlight settings, allowing full illumination of channels in the dark.


PDP-Label_set.jpg

CUSTOMISE YOUR OWN

Two Sticker sets come with every Power Distribution Panel:


1) Multi-coloured Label Set

2) Black and white Label Set


Both Label sets allow back light illumination.


USE WITH OTHER CARTEK PRODUCTS

The Power Distribution Panel has two dedicated pins that can take in the Kill Signal from a CARTEK Battery Isolator XR. This will then shut down the Power Distribution Panel which will stop the engine from running if the ECU is powered by the Power Distribution Panel.


The Power Distribution Panel also has 16 switch inputs and 4 dedicated inputs, meaning you can use our Wireless Control System to activate and control channels.


SPECIFICATIONS

Size:

W=108 mm,  H=30 mm, L=85 mm

Weight:

625g

Rear connectors:

AMP 1-776231-1, AMP 1-776231-5

M6 Stud for Power Input

Operating Voltage:

6-12v

Total Output Current:

160 A (Continuous)

Current Settings:

0A, 5A, 10A, 15A, 20A, 25A, 30A

Power Outputs

16

ECU Inputs

16

Switch Inputs/Outputs

16

Battery Isolator XR Signal Inputs

2

Operating Temperature:

-10 -+85

Wiper Control

Dedicated Wiper module with park position input.

Back Light

Low and High power settings

Environmental Protection:

Front and Rear Gaskets, protection from Dirt.

Part Numbers:

CK-PDP-16

WHERE TO BUY

FIND A DEALER

BUY ONLINE

NEED MORE CHANNELS?

CARTEK also produce a smaller 4 Channel Power Distribution Module that can be used if you need to power more channels.


The 4 x 10 amp outputs can be used to control power to various devices such as ECUs, instrumentation, lighting, starter solenoid, radiator fan, etc.


Channels will automatically shut down if a short circuit or over-current is detected - LED Status indication on the PDM makes fault finding simple.


Click Here for more information


Click to Enlarge

WHERE TO BUY

VIDEO COMING SOON

Click Here to download instructions

Click Here to download 2D/3D Drawings

EASY TO PROGRAM

Unlike most PDM’s on the market our Power Distribution Panel does not need a laptop to program the configuration. Preset options for functionality and current settings can be chosen by going through a simple process via the switch panel (see tutorial video). This saves the user time and any potential labour costs in setting it up.


The CARTEK Power Distribution Panel is one of the most cost-effective solutions on the market due to the switch panel being designed as part of the package, whereas most other PDM’s require expensive CAN-Bus Switch Panels to be purchased and programmed separately.


CONNECTOR KITS

CARTEK offer a choice of connection packages, each sold separately.


CK-PDP-CC: Two connectors and 39 crimped wires (30-50cm wire length)

CK-PDP-LF: Two connectors and 50 loose crimps (wiring & crimp tool required)


CK-PDP-CC CK-PDP-LF